Filter Flocculant Tablets (20 x 50g Per Box)

Filter Floc Tablets assist with the removal of small suspended particles, algae and calcium carbonate, helping to achieve a clear and sparkling pool.

Dose Rate:
two tablets per 100 cubic metres of pool water

Instructions for Use:

• Test to check the chemical balance
• Backwash the filter to clean and reset to normal filter cycle
• Remove non-woven sleeve and add 2 filter floc tablets per 100 cubic metres of pool water via the skimmer basket or pump stariner basket
• The circulation pump should be run continuously for 48 hours
• Backwash the filter if required if required during this period and redose with filter floc tablets

To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3 ppm for pools and 3-5ppm for spas, and a pH level of between 7.2 and 7.6. The ideal pH level is 7.4.

Always add chemicals to water and never water to chemicals. Never mix chemicals.