b'MACHINERYColMAP TMSLALOM 7The ColMAPTM Slalom 7 is a linear automatic The chassis of the machine is extruded anodized sealing machine working with a tool plate indexingaluminium and it is assembled on 6 x adjustable system. It is manufactured and designed tolevelling feet and 6 x castors for mobility.accommodate a range of paperboard ModifiedInterlock safety panels, covers and control boxesAtmosphere Packaging (M.A.P.) products, includingare in stainless steel S304. All panels are easilysandwich packs, salad boxes, and film lidded trays. removable for maintenance or clean down of machine.Packs are placed by hand into tooling pocket plates. The machine then indexes through the vacuum and gas chamber following the desired M.A.P. programme.Features and benefitsTooling plates index pneumatically within poly guides Selection of up to 10 programmes to vary amounts Index and tool plates are centralised before sealof vacuum and gas fill to achieve the desired residual closure, this system optimises reliability oxygen contentVacuum and gas and seal cycle commences Electronic systems are positionedwith safety control in stainless steel panel for easy inspectionIndexing through into the seal head area is under and maintenancea roller to assist in the fold and crease of the pack External 106 m3 vacuum pumpflange edges before sealingVacuum can be controlled by time or by sensorNo need for tools to extract tool plates as theseGas inlet for premixed gas (customer supply)drop into position onto sealing guides which controlRegulator of pressure and sensor of gas supplyposition and indexing is fitted and an audible alarm for lack of gasTeflon coated heated seal plate or low gas soundsRemoval and complete change over of tool sets Ejection / exit at 900C to infeed and gravity drop is approximately 15 minutes onto customers accumulation table or conveyorTouch screen and push button controls, from Optional extras: coders, load stations, interlocksa control panel surface mounted at infeed and right and left hand exit Can be used to seal plastic traysTechnical dataOrder code 08COLSLAProduction speed up to 5 cycles per minute for M.A.P. packs and up to 10 cycles per minute for non-M.A.P. packs Sealing area capacity 380 x 265mmDimensions 3800 x 1360 x 1400mm (machine footprint)Weight 700kg approx.Power 32 Amp x 3 phase x 50/60Hz + N + E (5 pin 16 Amp industrial)Air supply Customer supply compressed airVacuum Pump Included outside of machineTel: +44 (0)1525 712 261sales@colpacpackaging.comwww.colpacpackaging.com 107'