Splash Non-Chlorine Shock Granules 5kg

An easy method for shock dosing swimming pool and spa water, without raising the chlorine level.

Instructions for Use:

• Test to check the chemical balance
• To shock dose your pool or spa add:
        - 15 grams per 1,000 litres (220 gallons)
        - 60 grams per 5,000 litres (1,100 gallons)
        - 120 grams per 10,000 litres (2,200 gallons)
        - 720 grams per 60,000 litres (13,200 gallons)
• Fill a clean plastic bucket with water, add the required dose of non-chlorine shock and mix well
• Add the solution to your pool or spa near the water inlet with pump running
• Allow the chemicals to circulate for 2-3 hours then re-test and repeat if necessary

To ensure safe use of your pool or spa, maintain a free chlorine level of 1-3ppm for pools and 3-5ppm for spas and a pH level of between 7.2 and 7.6. The ideal pH level is 7.4.

Always add chemicals to water and never water to chemicals. Never mix chemicals.